800A Crawler mounted properly drilling machine
CZPT Parameter
| Model | 800A |
| Max. drill depth:700m | 700m |
| Drill diameter:140-500mm | one hundred forty-500mm |
| Working air stress | 1.05-6.45MPa |
| Air consumption | 16-ninety six.four m³/min |
| Drill rod size | four.5m |
| Drill rod diameter | Φ89/Φ108/Φ127mm |
| Air reverse double ply drill rod | Φ127mm(Optional) |
| Axial force | 6t |
| Lifting force | 32t |
| Sluggish lifting velocity | 4.4m/min |
| Slow feed velocity | .5-7.2m/min |
| Rapidly lifting velocity | 25m/min |
| Fast feed speed | 36m/min |
| Rotation torque | 13000Nm6500Nm |
| Rotation velocity | -80r/min,-160r/min |
| Lifting ability of huge winch | 4t |
| Lifting capacity of little winch | 1.5t |
| Mud pump circulation price | 600L/min(Optional) |
| Centrifugal pump movement rate | 1300L/min(Optional) |
| Dynamo | 24Kw/380v(Optional) |
| Penetration rate | 10-25m/h |
| Quality capability | 21° |
| Fat | fifteen.5t |
| Entire dimension | eight.7×2.3×3.3m |
| Application development | Unconsolidated layer or bedding rock |
| Drill approach | Down the gap |
| Hammer | Intermediate of large air force series |
Gain
1. Transfer very easily & good mobility
2. Simpleoperation & high effectiveness
three. Professional Price.
Software
one. Drilling wells for urban and rural lifestyle
2. Drilling wells for agricultural irrigation and industries
three. Drilling for geotechnical survey
four. Drilling building engineering holes
5. Drilling geothermal pump wells
Composition Features:
one. Diesel engine-driving hydraulic system. Vacation, rotate, feed, hoist, land, carry, unload and so on are all operate by hydraulic elements.
two. For the duration of rock drilling operation, you can use down the hole hammer or reverse hammer(optional) that air compressor will offer wind to generate and slag. In operation, you can use hammer and common drill rod to make optimistic circulation operation or use reverse hammer and double ply drill rod(consumption air via the gap of the double ply, and slag via the inner tube) to make reverse circulation procedure.
three. If use reducing or tri-cone bit to drill the hole, you can decide on mud pump and slag with mud.
four. Doing work device is made up of feed method, slide manual(mast), prime-driving rotary head, slide plate, centering apparatus, unloading system and hoisting technique, and so forth.
5. CZPT stress integrates the leading-driving rotary machine into block to understand the power output of the torque and speed of equally finishes in continuous energy, lower pace high torque and substantial speed reduced torque. In get to adapt to diverse internet site circumstances and drilling diameters.
6. Rotary machine is capable of turning away from the drilling axis, and make it convenient for the winch to fall the pipe and function.
seven. Cylinder plate chain propulsion mode, trustworthy and resilient
8. Roller slide is wearable.
nine. Axial force, feed pace and rotation velocity are adjustable.
10. The lifting capability of huge winch is four tons. The steel rope is 60 meters prolonged, and it can assist with lifting, dropping the pipe. The lifting ability of little winch is one.five tons, and can lift drill bits, instruments, and so forth. Or help with discharging drill rod.
11. Crawler self-driven framework travel manner, easy to go. Use crawler chassis. Steel track hyperlink(Inlaying rubber block is in selection which is effortless to journey on town streets).With four high landing legs as common configuration. Throughout long-length transportation loaded with car, it can be moved on to the motor vehicle immediately and easy for transportation, no need to lift.
Packing
Relevant Merchandise
Our Business & Service
CZPTtek Sector (ZheJiang )Co.,Ltd., found inZheJiang ,China, is an built-in corporation specialized in manufacturing and exporting leading high quality drilling tools and drilling elements for many years. We are supported and assisted by a highly seasoned team of designers and engineers that permit us to comprehensive all the assigned assignments successfully as per the specified requirement from our clients.
FAQ
Q: How can we decide on a suitable drinking water well drill rig?
A: We usually advocate a suitable product in accordance to drilling depth, drilling gap dia. and layer problem on internet site.
Q: Are you a factory or a trading organization ?
A: We are an integrated corporation specialized in producing and exporting.
Q: What is your payment terms?
A: We can settle for T/T,L/C.
Q:.What is your MOQ? How extended is the delivery time?
A: Our MOQ is 1 sets. Typically for drill rig, the delivery time is about twenty five-thirty times soon after receiving payment, the drilling instruments would be about 3-five days.
Q:. How prolonged is the warranty?
A: The promise period for mainframe is a single yr (excluding the rapid dress in parts).
Q: Can we print my Symbol on the items?
A: Sure, we can. We support OEM .
Contact
Sunny Xihu (West Lake) Dis.(Sales Agent)
CZPTtek Market (ZheJiang ) Co., Ltd.
Address:No.B-2507, Xihu (West Lake) Dis.WeiCheng, GuanZhuang,Chao Yang District, ZheJiang , China.
Tel: -10-52864265/52864786
Fax: -10-5257170
Cellular:-13426425710
Website: /
